Joint
adhesives
For folds in
real and synthetic leathers and bonding lining to upper
PRESSION
PARACOL/E
Natural rubber-based adhesive. Strong tack. Colour: neutral.
PRESSION 87/89
Polychloroprene adhesive with long open time. Strong tack. Colour: neutral.
PRESSION 4099
Polychloroprene adhesive spread on one side only. Very long open time. Strong tack. Colour: pale straw.
LATEXCOL/60
Pure latex based on natural rubber.
LATEX
H/5
Totally solvent-free water-based adhesive. Specifically designed for gluing
(ungreased) leather and synthetic leathers.
AQUAGUM™ M/1799
Totally solvent-free single-component water-based spray adhesive, specifically designed for application of lining to upper and for gluing hides in general.
AQUAGUM™ M/9899
As above, but tackier.
AQUAGUM™ B/4199
Two-component water-based spray adhesive, specifically designed for gluing hides and synthetic leathers and for bonding lining to upper. Strong initial curing.
Adhesives
for binding wedgesFor binding heels
and wedges made of wood, polystyrene and EVA PRESSION CPE/195
Fast-curing, high fluidity polychloroprene adhesive. Good heat resistance.
AQUAGUM™ M/080-D
Water-based single-component adhesive, high-tack.
PRESSION IMMERCOL
Thermoplastic adhesive for immersion binding of polystyrene heels.
AQUAGUM™ M/10599
Single-component water-based adhesive specifically designed for binding polyurethane or PVC wedges with real or synthetic leather. Used cold, very fast and easy to use.
Lasting
adhesivesFor lasting upper
to insole PRESSION CR
Fast-curing polychloroprene adhesive, resistant to the temperature of the pressing oven.
PRESSION 2080
Ultra-fast curing polychloroprene adhesive, resistant to very high temperatures.
AQUAGUM™ M/029
Water-based single-component adhesive. Rapid curing.
Excellent heat resistance.
PRESSION ET
Polychloroprene adhesive with good tack and long open time, suitable for absorbent materials.
SUPERPIVIGUM E/8399
Single-component polyurethane adhesive specifically designed for lasting, including lasting of synthetic materials, without heat reactivation.
Adhesives
for gluing natural solesFor gluing leather,
coria and tunith soles with leather and fabric uppersPRESSION CP/SUPER
Polychloroprene adhesive for very difficult gluing jobs. Excellent heat resistance and fluidity.
PRESSION NTV/3000
As above, but its use is advisable with highly absorbent materials.
PRESSION CP/TRASPARENTE
As above, but its use is advisable with pale materials. Colour: totally transparent.
PRESSION 2699
Polychloroprene adhesive with good tack and good heat resistance.
PIVIGUM 1039
Polyurethane adhesive for use with or without activator (5%).
Excellent yield.
Can be reactivated at low temperature.
Colour: transparent.
AQUAGUM™ M/1400/D
Water-based adhesive. Specifically designed for gluing leather soles and (ungreased) leather and fabric uppers.
LATEX H/3
Totally solvent-free water-based adhesive. Specifically designed for gluing leather soles and (ungreased) leather and fabric uppers.
AQUAGUM™ P/075
Two-component water-based polyurethane adhesive, specifically designed for all difficult gluing jobs with synthetic and natural materials. The same working time as for solvent-based adhesives.
PRIMER PRESSION
Highly fluid polychloroprene adhesive for use as first coat with highly absorbent materials before gluing with polychloroprene adhesives.
Adhesives
for gluing synthetic solesFor polyurethane
and PVC soles with uppers made of real or imitation leather or fabric
SUPERPIVIGUM E/197
Polyurethane adhesive designed for use without activator. Rapid curing. Very low reactivation temperature. Colour: transparent.
PIVIGUM 1039
Polyurethane adhesive designed for use with or without activator (5%). Suitable for difficult gluing jobs, including absorbent hides.
PIVIGUM 1033
Single-component polyurethane adhesive. High yield and fluidity. Very strong initial curing and excellent heat resistance.
AQUAGUM™ P/075
Two-component water-based polyurethane adhesive, specifically designed for primary gluing of synthetic soles.
PRIMER PIVIGUM
Polyurethane primer for use as first coat on highly absorbent supports before spreading with polyurethane adhesives.
Adhesives
for gluing rubber solesFor rubber soles
and leather or fabric uppersPRESSION NEOVULK
Polychloroprene adhesive for use with 8% activator. Very good heat resistance. Good yield and fluidity.
PRESSION VULKAPRENE
As above, and also suitable for absorbent materials.
PRESSION VULKAPRENE/075
As above, but an economical type.
PIVIGUM 4499
Polyurethane adhesive for use with or without activator (5%) after treating sole with our halogen primer FRABOCLOR/E. Low reactivation temperature, excellent yield and spreadability.
AQUAGUM™ P/075
Two-component water-based polyurethane adhesive, suitable for primary gluing of rubber soles after halogenising with our halogen primer FRABOCLOR/E.
Adhesives
for gluing thermoplastic solesFor TR rubber soles
and leather or fabric uppers
PRESSION TR/60
Polychloroprene adhesive for use with 5% activator. Very good heat resistance. Long tack time.
PRESSION TR/65
As for TR/60, but a more economical type.
PIVIGUM 1039
Polyurethane adhesive for use with or without activator (5%), after treating sole with our halogen primer FRABOCLOR/E.
AQUAGUM™ P/075
Two-component water-based polyurethane adhesive, suitable for primary gluing of TR soles after halogenising with our FRABOCLOR/E.
Adhesives for gluing
insole and hygienic insole
PRESSION 2017
Polychloroprene adhesive for sole manufacturers, designed for use on one
side only. Suitable for gluing sole to arch support, even in the case
of strong tensions.
PRESSION ETE/295
As above, but for use on both sides.
Aquagum™ m/038-d
Single-component water-based adhesive suitable for gluing hygienic insoles.
Spread on one side only.
PRESCOL PSP
Totally solvent-free water-based adhesive. Suitable for application of
hygienic insoles. Can be spread on one side only.
Thinners, solvents,
activators and halogen primers DILUENTE PRESSION
Ready-for-use thinner solution for cleaning brushes and automatic machines.
SOLVENTE A
As above, but suitable for polyurethane adhesives.
PULITORE 3699
Degreasing solution for synthetic soles, for removing silicone releasing agents and pollutants in general.
ATTIVATORE RFE
Hardener for polychloroprene and polyurethane adhesives. Colour: neutral.
ATTIVATORE RC
Specific hardener for machine-applied adhesives. Long open time. Colour: neutral.
FRABODUR 010
Hardener for polyurethane and polychloroprene adhesives. Colour: neutral. Economical type.
FRABOCLOR/E
Ready-for-use halogenising solution. Suitable for treating rubber and TR soles before gluing with polyurethane adhesive.
CAT/1598
Water-based hardener specifically designed for AQUAGUM™ P/075 adhesive.
CAT/2299
Water-based hardener specifically designed for two-component spray adhesives in the AQUAGUM™ range.